Application — Environmental Monitoring

Fast Mobile NOx Analysis

Ultralight, mobile NOx measurement for monitoring with drones, bikes or on foot

MethodChemiluminescence (luminol)
Detection RangeNO₂: <2 ppb – 500 ppb
Sample PhaseGas phase (air)
InstrumentMiCRO NOx
→ View MiCRO NOx Specs

Air Pollution Knows No Boundaries. Neither Should Monitoring.

Conventional urban air quality monitoring stations are often located near busy roads and major traffic intersections. While they provide valuable data on local pollution levels, they reveal little about NOx concentrations in surrounding streets, residential areas, or above street level. Nevertheless, such limited spatial information often forms the basis for decisions on traffic restrictions and other air quality measures.

Traditional NOx analyzers are typically bulky and have response times that make them unsuitable for mobile measurements.



The MiCRO NOx changes that. Its compact, lightweight design and fast response enable high-resolution NOx measurements on mobile platforms, including drones. Instead of measuring pollution at a single location, the MiCRO NOx makes it possible to map its spatial distribution in three dimensions.



See where the pollution really is — not just where the monitoring station happens to be.


How the MiCRO NOx Solves This

Under 2 kg in the Air
The MiCRO NOx flight module weighs less than 2 kg in a 3D-printed housing, records temperature, humidity and pressure with every point, and is calibrated and read out through a separate portable ground station.
Up to 5 Hz Measurement Rate
MiCRO NOx samples at up to 5 Hz with a GPS position and time stamp on every point.
Proven Method
The chemiluminescence technique offers enhanced sensitivity, reaching as low as 1 ppb, and exhibits minimal interference from other analytes.
Smart Solutions
With the GPS location and the concentration, cities can find the sources and hot spots of NOx and create smart solutions for cleaner cities.
Interested in this application?

Discuss your measurement requirement with our specialists.

Our application engineers advise on instrument configuration, regulatory compliance, and system integration for your specific task.

Request Quote → Technical Inquiry → Datasheet MiCRO NOx (PDF)

MiCRO NOx — Key Specs

Instrument specifications relevant to this application. Full data sheet available for download.

Detection Limit
~1 ppb
Range
<2 ppb – 500 ppb
Time Resolution
0.2 s (measurement rate up to 5 Hz)
Weight
flight module <2 kg · ground station 5 kg
Power Supply
12 – 24 V DC, max. approx. 17 W

Cross-Sensitivities

The luminol solution is optimised for NO₂ and suppresses the cross-sensitivity to SO₂. With a different luminol solution and a special scrubber, the instrument can also measure SO₂, with the cross-sensitivity to NO₂ suppressed.

Frequently Asked Questions

How much does the drone-mounted NOx system weigh?
The flight module is under 2 kg, in a 3D-printed housing. It samples at up to 5 Hz with a GPS position and time stamp plus temperature, humidity and pressure on every point. Calibration, maintenance and data transfer happen on a separate portable ground station, so nothing unnecessary flies.

Discuss Your Measurement Campaign

Tell us your site, the target species and the flight profile you plan — we will suggest the setup.