Precision gas and liquid analyzers for the trace concentration range. Made in Garmisch-Partenkirchen, Germany.
Unterfeldstraße 12 · 82467 Garmisch-Partenkirchen · Germany
info@aero-laser.de
Just below the Zugspitze summit, Germany's highest research station feeds continuous carbon monoxide data into the WMO's Global Atmosphere Watch network — measured by two Aero-Laser instruments, built a few kilometres down in the valley.
Some measurement sites are chosen for convenience. The Schneefernerhaus was chosen for the opposite reason: at 2650 metres above sea level, perched into the south face of the Zugspitze, it sits above the boundary layer for much of the year — sampling air that represents the continental European background rather than local pollution.
Carbon monoxide is one of the key tracers in atmospheric chemistry. It maps combustion plumes, constrains OH-radical chemistry and helps separate long-range transport from local sources. But to detect a change in the background, you first need air that qualifies as background — free of the morning commute, the neighbouring chimney, the valley inversion layer.
That is what makes high-altitude observatories like the Schneefernerhaus so valuable to the Global Atmosphere Watch (GAW) programme of the World Meteorological Organization. The station, Germany’s highest environmental research facility, monitors the chemical and physical state of the free troposphere — and CO is one of its continuously measured core parameters.
At background level, carbon monoxide moves in single-digit ppb steps. An instrument that drifts by that much per week doesn’t measure a trend — it invents one.
— Aero-Laser application engineering
Background CO in the free troposphere sits between roughly 80 and 150 ppb, with seasonal amplitude and long-term trends of just a few ppb per year. The analytical requirements follow directly:
The UFS operates two Aero-Laser CO monitors — an AL5001 and an AL5002 — running in parallel. Both use vacuum-UV resonance fluorescence: CO molecules are excited at 150 nm and their fluorescence is counted photon by photon. The method responds within 1 s, is linear across five orders of magnitude and has no known interferences except water vapour, which is removed with a Nafion dryer.
| Parameter | Requirement at UFS | AL5001 / AL5002 |
|---|---|---|
| Detection limit | < 3 ppb | < 1 ppb |
| Response time | < 1 min | 1 s |
| Linear range | 80 – 150 ppb typical | 1 – 100000 ppb |
| Water-vapour interference | must be negligible | removed with a Nafion dryer |
The redundant two-instrument configuration gives the station something a single analyzer cannot: an internal consistency check. Divergence between the two time series flags a calibration issue long before it would surface in the GAW data review.
The CO record from the Schneefernerhaus feeds directly into the GAW World Data Centre. For us, the station is also the shortest field-support route we have: the instruments were built in Garmisch-Partenkirchen, in sight of the mountain they measure on.
Whether you run a GAW site, an urban supersite or a mobile campaign: the requirements are the same physics. If your CO baseline needs to be trusted for years, the combination of VUV fluorescence, sub-ppb detection and drift-traceable calibration is what keeps the time series honest. Our application engineers are happy to talk through station integration, calibration strategy and data QA — directly, without a sales funnel.
Got a measurement challenge this article doesn't cover? Our team responds within one business day — no sales funnel, direct expert contact.